Difference between revisions of "IntelliDoor Keypad"

imported>NelsonJenkins
imported>NelsonJenkins
 
(2 intermediate revisions by the same user not shown)
Line 15: Line 15:
 
* Password: This is the keypad's password. It can be anywhere from 1-5 digits, each a number from 0-9.
 
* Password: This is the keypad's password. It can be anywhere from 1-5 digits, each a number from 0-9.
 
* Access: This is the base access setting. Can be "Everyone", "Group", or "Owner". These people can click the card swipe reader on the keypad to be immediately granted entry.
 
* Access: This is the base access setting. Can be "Everyone", "Group", or "Owner". These people can click the card swipe reader on the keypad to be immediately granted entry.
* Whitelist: The list of people that will always be able to click the card swipe reader to gain entry. Separate with commas. NOTE ON NAMES: The IntelliDoor system v2.1 and above uses usernames (e.g. "nelson.jenkins" or "newusername") - NOT old-style names ("Nelson Jenkins" or "newusername Resident") and NOT display names ("Nelson the Magnificent" or "New User"). Separate values with commas (nelson.jenkins, newusername, etc.). Entries here are not case-sensitive.
+
* Whitelist: The list of people that will always be able to click the card swipe reader to gain entry. Separate with commas. '''NOTE: Whitelist names are ''usernames'' (nelson.jenkins, newbie), not ''legacy names'' (Nelson Jenkins, Newbie Resident).''' If you have more than 10 names, please read "Extended Whitelist" below.
 
* GSS: If you are using a Global Security Server, enter its name in this field. The IntelliDoor GSS provides a "master" whitelist and blacklist for doors that subscribe to it (for example, if you have a group of doors that you want a list of people to control).
 
* GSS: If you are using a Global Security Server, enter its name in this field. The IntelliDoor GSS provides a "master" whitelist and blacklist for doors that subscribe to it (for example, if you have a group of doors that you want a list of people to control).
 +
* AKS: This is for a future product. Ignore this field.
 
* Autoopen: Can be either Yes or No. Door(s) will automatically open when the keypad is unlocked if this is enabled.
 
* Autoopen: Can be either Yes or No. Door(s) will automatically open when the keypad is unlocked if this is enabled.
 
* DTMF: Can be either Yes or No. Changes default button sounds to DTMF tones (phone keypad sounds). This may weaken security if someone can "decipher" DTMF, but is generally harmless as anyone that wants to get in that badly can just sit-hack in.
 
* DTMF: Can be either Yes or No. Changes default button sounds to DTMF tones (phone keypad sounds). This may weaken security if someone can "decipher" DTMF, but is generally harmless as anyone that wants to get in that badly can just sit-hack in.
 
* HideNum: Can be either Yes or No. When disabled, this displays numbers instead of dashes when the password is entered. Not recommended unless you don't care if other people figure out the password.
 
* HideNum: Can be either Yes or No. When disabled, this displays numbers instead of dashes when the password is entered. Not recommended unless you don't care if other people figure out the password.
 +
 +
===Extended Whitelist===
 +
Because of LSL limitations, the whitelist line can only be read for 255 characters. However, the IntelliDoor system supports multiple whitelist lines. To be safe, separate your whitelist into 10-name increments, like so:<br>
 +
<code>WHITELIST=User01, User02, User03, User04, User05, User06, User07, User08, User09, User10<br>WHITELIST=User11, User12, User13, User14</code><br>
 +
You can have as many whitelist lines as you need.
  
 
==Compatibility==
 
==Compatibility==
The Keypad is fully compatible with the [[IntelliDoor Home & Commercial]], but only partially compatible with the [[IntelliDoor Garage]] and [[IntelliDoor Bollard]]. This is because the Garage & Bollards don't have a lock feature. However, you can set them to Owner only, and use the Keypad as a controller (enable auto-open, and use auto-close in the Garage or Bollards).
+
The Keypad is fully compatible with the [[IntelliDoor Home & Commercial]], but only partially compatible with the [[IntelliDoor Garage]], [[IntelliDoor Bollard]], and [[IntelliDoor Gate]]. This is because the Garage & Bollards don't have a lock feature. However, you can set them to Owner only, and use the Keypad as a controller (enable auto-open, and use auto-close).
 +
 
 +
==Builder Kit Instructions==
 +
<font size="4">[[Builder Kit Permissioning|Follow this guide]] before using your Builder Kit components, or they will break.</font>
 +
 
 +
Make sure you review the [[Gentek Company Policy|Full Permissions Agreement]] to understand how you may distribute IntelliDoor products. Remember, objects in violation of this agreement will be remotely deleted. Therefore, make sure you follow the above instructions exactly.
  
 
==API==
 
==API==
Line 39: Line 50:
 
==Updates & Release Notes==
 
==Updates & Release Notes==
 
You can update your IntelliDoor Keypad by rezzing the Update Box.
 
You can update your IntelliDoor Keypad by rezzing the Update Box.
 +
* v3.1
 +
** Minor bugfixes to improve performance
 
* v3.0
 
* v3.0
 
** Implemented Buildbox integration
 
** Implemented Buildbox integration
Line 49: Line 62:
 
* v2.1
 
* v2.1
 
** Primary public release.
 
** Primary public release.
 
==Builder Kit Instructions==
 
'''''ATTENTION USERS OF THE BUILDER KIT VERSIONS: THIS IS IMPORTANT, PLEASE READ'''''<br>
 
Your use of transfer-enabled products is bound by our [[Gentek Company Policy|Full Permissions Agreement]]. If you haven't read it, it's important you do so.<br>
 
Most importantly, we keep track of who has purchased the Builder Kit. If someone has a transferable IntelliDoor but has not bought the Builder Kit, that door will not function, and their use of it will be recorded. If you are found to be giving out transferable IntelliDoors, you will be backtraced by the cyber police, and consequences will never be the same.<br><br>
 
Therefore, ''make sure you set the door object to NO TRANSFER and the script inside it to NO TRANSFER before distributing it.'' However, '''leave the notecard FULL PERMISSIONS''' or it will break the script. Otherwise, you are risking both your license to use our products and your reputation with your customers, who will be left with prefabs that have their doors break when rezzed.
 
  
 
{{Gentek}}
 
{{Gentek}}

Latest revision as of 17:38, 10 February 2015

Other than the security options in the door, the IntelliDoor Keypad allows for access by anyone with a custom-set password. It can be from 1-5 characters, and the Keypad has various customization options beyond just the password. It is also mesh, sporting high detail for only a prim.

Setup

  1. Set up the door according to its user manual..
  2. Rez the keypad near the door and position it.
  3. Open the _config notecard inside the keypad and make sure the DoorID is the same as the DoorID in the door's _config notecard. Also, change the password. Remember, anyone can unlock the door if they have the password, so make it difficult to guess.
  4. Save the _config notecard and test the keypad by entering the password. The green indicator light should turn on, and should turn off when you open the door. (As owner, you can open the door without unlocking it, so get someone not covered by the base access setting to test it as well.)

You can view the password by clicking the * button (only the owner can do this). To clear the entry, press the # button.

Textures

Two keypad textures are included; simply drag them onto the keypad buttons to change between them.

Config Values

  • DoorID: This is the door's identifier. Make sure this is the same as the DoorID value in the door's _config notecard.
  • Password: This is the keypad's password. It can be anywhere from 1-5 digits, each a number from 0-9.
  • Access: This is the base access setting. Can be "Everyone", "Group", or "Owner". These people can click the card swipe reader on the keypad to be immediately granted entry.
  • Whitelist: The list of people that will always be able to click the card swipe reader to gain entry. Separate with commas. NOTE: Whitelist names are usernames (nelson.jenkins, newbie), not legacy names (Nelson Jenkins, Newbie Resident). If you have more than 10 names, please read "Extended Whitelist" below.
  • GSS: If you are using a Global Security Server, enter its name in this field. The IntelliDoor GSS provides a "master" whitelist and blacklist for doors that subscribe to it (for example, if you have a group of doors that you want a list of people to control).
  • AKS: This is for a future product. Ignore this field.
  • Autoopen: Can be either Yes or No. Door(s) will automatically open when the keypad is unlocked if this is enabled.
  • DTMF: Can be either Yes or No. Changes default button sounds to DTMF tones (phone keypad sounds). This may weaken security if someone can "decipher" DTMF, but is generally harmless as anyone that wants to get in that badly can just sit-hack in.
  • HideNum: Can be either Yes or No. When disabled, this displays numbers instead of dashes when the password is entered. Not recommended unless you don't care if other people figure out the password.

Extended Whitelist

Because of LSL limitations, the whitelist line can only be read for 255 characters. However, the IntelliDoor system supports multiple whitelist lines. To be safe, separate your whitelist into 10-name increments, like so:
WHITELIST=User01, User02, User03, User04, User05, User06, User07, User08, User09, User10
WHITELIST=User11, User12, User13, User14

You can have as many whitelist lines as you need.

Compatibility

The Keypad is fully compatible with the IntelliDoor Home & Commercial, but only partially compatible with the IntelliDoor Garage, IntelliDoor Bollard, and IntelliDoor Gate. This is because the Garage & Bollards don't have a lock feature. However, you can set them to Owner only, and use the Keypad as a controller (enable auto-open, and use auto-close).

Builder Kit Instructions

Follow this guide before using your Builder Kit components, or they will break.

Make sure you review the Full Permissions Agreement to understand how you may distribute IntelliDoor products. Remember, objects in violation of this agreement will be remotely deleted. Therefore, make sure you follow the above instructions exactly.

API

As of v3.0, the IntelliDoor has an API for controlling individual doors and components. All API communication is done on channel -494827459.

For the following, [BBID] specifies the Buildbox ID. By default, this should be NONE. However, if your keypad was rezzed as part of a building through a Buildbox, it will have been set. You can get the Buildbox ID by selecting a keypad and checking its description - it should read BBID followed by the ID, which is usually formatted as a 36-character UUID or just "NONE". You can also set up your API-enabled item in the building such that it accepts and stores the Buildbox ID when it is rezzed. Note that Buildbox IDs do not change once the object is rezzed.

The IntelliDoor Keypad sends the following API commands:

  • [BBID][DoorID]&&open - Sent if the keypad's Autoopen setting is Yes after the unlock command is sent.
  • [BBID][DoorID]&&unlock - Sent when the keypad is unlocked.
  • [BBID][DoorID]&&lock - Sent when the keypad is relocked.

You should send the following API command to the keypad:

  • [BBID][DoorID]&&clear - Send this from the door when it is opened. This will clear the keypad's unlocked state, and will cause both the keypad and the door to relock.

Updates & Release Notes

You can update your IntelliDoor Keypad by rezzing the Update Box.

  • v3.1
    • Minor bugfixes to improve performance
  • v3.0
    • Implemented Buildbox integration
    • Usernames in whitelist are no longer case-sensitive
    • Blacklist removed
    • Communications now streamlined onto single channel for less lag
    • Two keypad textures now included
  • v2.1.3
    • Fixed integration bug with GSS.
  • v2.1
    • Primary public release.